BETAFPV ELRS V3 Air65 Brushless Whoop Quadcopter — Ultralight 1S 65mm Micro Drone with C03 FPV Camera, 5IN1 Air Brushless FC, 27000KV Motors for FPV Racing

Meet the BETAFPV ELRS V3 Air65: ultralight, agile, and ready for FPV racing

The Air65 is engineered for rapid, responsive flying in a compact 65mm package. At just 17.3g, this micro whoop pairs an ultra-light frame with a capable 5IN1 Air brushless flight controller, delivering a crisp throttle response ideal for tight indoor venues and nimble outdoor runs. The integrated C03 FPV camera keeps the feed lightweight while staying surprisingly clear for micro racing sessions.

Key components blend efficiency with speed. The 0702SE Ⅱ 27000KV motors drive a 12.7% boost in propulsion efficiency and a thrust-to-weight ratio of 5.82:1, helping pilots push agile maneuvers without sacrificing control. A C03 micro camera and onboard 5.8 GHz VTX provide a compact, all-in-one flight setup that you can tune for your space—from a small living room to a sunlit outdoor court.

What you get and how it performs

• Ultralight 17.3 g weight with 65 mm wheelbase for swift, precise handling
• Air65 brushless frame and 5IN1 Air brushless FC built on the G473 processor for efficient flight control
• Onboard 5.8 GHz VTX adjustable from 25 to 400 mW to fit indoor or outdoor needs
• C03 camera weighs about 1.45 g for a light, clear FPV image
• 0702SE Ⅱ 27000KV motors paired with GF 1219S 3-blade props for fast, responsive bursts
• Serial ELRS 2.4G RX with default ELRS protocol and V3 firmware for easy binding
• Flight time around 4 minutes with a 260 mAh LAVA 1S battery (at specified voltages)

Real-world use and setup tips

• For indoor flights, keep VTX power toward the lower end (25–100 mW) to maximize flight time and reduce heat.
• Ensure transmitter protocol matches ELRS (V3) and re-bind if the drone drifts or loses bind.
• Calibrate gyro and accelerometer after extended use to keep flight characteristics consistent.
• Re-check camera cables and tighten connectors if the video feed becomes unstable.

Included and compatibility

Recommended parts include LAVA 1S 260/300 mAh batteries, ELRS receivers, and LiteRadio transmitters to unlock the Air65’s best performance. The kit also ships with an air canopy, four GF 1219S props, a USB-C adapter board, screws, and a packing of cables to support fast assembly and tuning.

Note: Higher VTX power increases heat and can shorten flight time. Start with 25–100 mW for daily indoor practice and adjust as you gain experience. The Air65’s design emphasizes agility and portability without promising guaranteed flight results in every setup.